Lunar Oxygen Production in a Hydrogen Cold Plasma
This paper examines the concept of oxygen production from unbeneficiated lunar regolith using a non-equilibrium or 'cold' hydrogen plasma. An experimental investigation has indicated that...
Fiber Optic Chemical Sensors on Mars
A fiber optic chemical sensing instrument is described that will measure the reactivity of the martian soil and atmosphere. The self-contained instrument monitors reflectivity changes...
Transfer Vehicle Sizing for Missions to Mars
The purpose of this study is to analyze the interactions between mission and vehicle design parameters, and determine how the selection of a particular trajectory and transit time affects...
Safety Assessment of a Chemical Reactor Vessel
The potential explosion loadings on a chemical reactor vessel is described in this paper. The potential loads presented provide a basis for designing spherical storage vessels which will...
Evaluation of Corroded Steel Chimneys
The paper is focused on the analysis of corroded steel chimneys. Cylindrical steel plates are exposed to thermal and chemical effects. The study is based on the results of extensive measurements...
A Quasicrystal for Denmark's Coast
The first true quasicrystal structure will have been built in the fall of 1993 at COAST (The Center for Art, Science, and Technology at the Danish Technical University). With 600 aluminum...
Damage Tolerance Analysis in Structural Rehabilitation
The rehabilitation of existing structures requires an evaluation by the structural engineer of past performance to determine the extent of existing damage. Following evaluation of the...
Design, Construction, and Maintenance of Relief Wells
Technical Engineering and Design Guides, as adapted from the U.S. Army Corps of Engineers, No. 3 This engineering manual provides guidance and information...
Removal Of Chromium From Groundwater Using Permeable Barriers: An Aquifer Simulation Study
Previous efforts to remediate groundwater contaminated by chromium-bearing industrial wastes have involved post-extraction methods, whereby groundwater is pumped to the surface treated...
Impacts of Natural and Manmade Changes on the San Luis Rey River Environment
Almost all rivers continually change their position and shape based on various geomorphic and hydraulic factors, caused by natural as well as manmade activities on the riverine environment....
Building Groundwater Optimizers That Respond to the Needs of Decision-Makers
Optimization methods are being sought and employed to design systems that remediate contaminated groundwater regions (and, in fact, the subsurface in general) with increasing frequency....
A Physically Based Conceptual Model for Simulating Contaminant Levels in Subsurface Water
A conceptual physical model is developed to simulate solute transport and mixing in the vadose (unsaturated) and groundwater zones. The conceptual model couples lumped-parameters models...
Plate and Frame Membrane Air Stripping
This paper examines utilization of a plate and frame membrane air stripping system for the removal of volatile organic chemicals (VOCs) and radon from a water supply. Previous work explored...
The Role of Shale Pores in Settlement
Waste fills resulting from the mining of coal in Appalachia should ideally consist of large, free-draining sedimentary rock fragments. The successful performance of these embankments is...
Controlling Lead and Copper Corrosion and Sequestering of Iron and Manganese
With the recently enacted Lead and Copper Rule (LCR), many utilities are faced with the conflict of meeting the requirements of the Rule and controlling aesthetic problems caused by source...
Modeling Issues of Copper Solubility in Drinking Water
The paper discusses the application of a model to the solubility of copper in drinking water. This paper is the result of numerous forms of pitting corrosion and pipe failures. Monitoring...
The Effects of NOM and Coagulation on Copper Corrosion
Copper corrosion was examined in solutions containing natural organic matter (NOM) and in situations where NOM was removed by enhanced coagulation with alum or ferric chloride. Electrochemical...
Water Chemistry of Lead Corrosion Control
Requirements of the Lead and Copper Rule (U.S. EPA) makes it necessary for regulators, consultants, and water purveyors to understand the fundamental relationships between water quality...
The Relationship of Speciation to Iron and Manganese Removal Strategies
Case studies are presented describing how Fe and Mn speciation procedures were used to solve process problems at two water utilities. A series of filtration steps are used to separate...
Comparison of Biological and Chemical/Physical Iron Removal
The report compares the efficiency of chemical/physical and biological iron removal processes during the entire filter cycle. The results of the first three pilot studies performed in...
Return to search